Company news and technical notes from Wuxi Qianzhou Xinghua Machinery Co., Ltd.
Uneven coating or print bleed on banner fabric is often a matter of coat weight, infeed tension and oven temperature. Notes on specifying a banner coating machine, using official parameters and published patents.
Luggage and oxford fabrics are typically padded and coated for water resistance, hydrostatic-pressure resistance, ageing and abrasion resistance, and easy cleaning. Official parameters and related patents for this special-purpose machine.
On wide tarpaulin, infeed tension and temperature decide whether the selvedge is already steady before the coating head. Official uses and published infeed-frame patents.
A roll that starts thin and ends thick is usually a control problem, not a coating-material problem. How electro-hydraulic servo coat-weight control works with infeed and oven zoning.
Buyers usually start with working width and price. The heat source is what they live with for the next ten years. Notes on thermal oil, gas and steam, and why oven zoning matters more than the fuel.
If width is already wandering and the weft is skewed when fabric reaches the coating head, the head will not save the result. What heat setting does, with official parameters for Xinghua’s three published stenters.
The official typical lead time is about three months, or about four for special models. What also has to be planned is the trial run on the buyer’s fabric after installation, not only the ship date.
Mesh fabric coating is published for yarn locking, anti-stick and anti-slip performance, and heat resistance, including automotive seat fabrics and large advertising meshes. Official parameters for this special-purpose machine.
The predecessor factory started in 1993; the limited company dates to 2003 under the business license, at No. 3 Longtan Road in Qianzhou, Huishan.
The plant covers about 23,500 m² of land and 18,000 m² of buildings, with a workforce of more than 100 people and fabrication, sheet-metal, machining and assembly shops on one site.
The official site states a total of 119 patents; this article discusses only documents opened in public databases, and notes where earlier utility models were later terminated.
Drawing on official coating parameters and checked public patents, this article describes the process problems addressed by a combination head, a bitumen composite head and a double-sided sizing device.
From a carpet oven and cooling after a stop to steam-box drip prevention and tension-feedback heated rollers, this article reads opened patent texts against official thermal parameters, and distinguishes former grants from rights still in force.
The company appeared on Jiangsu’s 2019 first batch of proposed high-tech enterprises; the certificate displayed on the official site, number GR202532008525, was issued on 19 December 2025 and is valid for three years.
The quality-system certificate displayed on the official site conforms to ISO 9001:2015 for finishing-equipment manufacture, valid until 29 September 2029; the Machinery Directive attestation covers only the FH-520 artificial-grass carpet coating line.
The official site publishes about 29 models in five lines — coating, setting, carpet, electrostatic flocking and other machinery. The figures are configurable ranges, not acceptance data locked in without samples.
From the factory to the limited company, change has come in models, patents and certificates. Place, the finishing-equipment business, customising to the process and talking at the plant can still be checked in the public record.
The plant is at No. 3 Longtan Road; tel. 0510-83397635 / 0510-83382635; email info@xhmachinery.com. The company will exhibit at ITMA ASIA + CITME in Shanghai, 20–24 November 2026, booth H8.1-D11.
A Chinese-only news article on the coating and carpet equipment being taken to ITMA ASIA + CITME 2026 (20–24 November, Shanghai, booth H8.1-D11) is on the Chinese News page. The exhibition page itself is also available in English.
