本文另有中文版。
If the earlier articles are to be closed into information that can be acted on, only three things need to be made clear: the capabilities that can be checked today, the occasions on which people can meet, and what should be prepared for an enquiry. Wuxi Qianzhou Xinghua Machinery Co., Ltd. does not need to be written as first in its industry, and it does not need unverified promises attached to it. Setting out the address, the products, the qualifications and the contact paths is already enough for both sides to begin a concrete discussion.
The conditions that can be presented now are these. The predecessor factory started in 1993, and the limited company was established in 2003 under the business license. The registered address is No. 3 Longtan Road, Qianzhou Supporting Area, Huishan Economic Development Zone, Wuxi; the unified social credit code is 91320206755880341L; and the official website is https://www.xhmachinery.com/. The plant covers about 23,500 square metres of land and about 18,000 square metres of buildings, with a workforce of more than 100 people, and has cold-working, sheet-metal, machining, final-assembly, electrical and warehouse workshops. Annual output is about 15 machines or lines. There are about 29 published models, covering coating, setting and carpet finishing, as well as adjacent equipment for electrostatic flocking, conveyor-belt coating, latex mattresses and automotive fibreglass board, which can be customised to the customer’s process. The official site states that products have been exported to Korea, Japan, Saudi Arabia, Nepal, Egypt, Turkey, Pakistan, India, Myanmar, Thailand, Uzbekistan, Argentina, the Netherlands, the United Arab Emirates, Indonesia and other countries and regions. The company is a national high-tech enterprise as stated on its official site; the certificate issued on 19 December 2025 bears the number GR202532008525 and is valid for three years. The quality-management system is certified to ISO 9001:2015 for the manufacture of finishing equipment, valid until 29 September 2029. The FH-520 Artificial Grass Carpet Coating Line holds a Machinery Directive attestation of conformity, valid until 10 February 2031.
The paths for a meeting or a plant visit are also public. The official site welcomes visitors and states that the plant is about 40 minutes by car from Wuxi Shuofang Airport and Wuxi East high-speed railway station. Sales and technical contact is mainly by telephone and email, on weekdays from 08:00 to 17:00, at 0510-83397635 or 0510-83382635, or info@xhmachinery.com; the site states that enquiries will be answered within one working day. The standard lead time is about three months, or about four months for special machines. Payment is a 30 per cent deposit, with the balance due before shipment; sea or land freight is supported. The warranty is one year. On-site installation and commissioning are provided, including the dispatch of staff overseas, with lifetime after-sales support, and trial running is carried out at the customer’s factory after installation. From 20 to 24 November 2026 the company will take part in ITMA ASIA + CITME 2026 at the National Exhibition and Convention Center in Shanghai, booth H8.1-D11. The booth is listed on the official website and on a public exhibitor list, and is a confirmed occasion for face-to-face discussion in the near term.
The more specific the material in an enquiry, the easier it is to align a proposal. For coating, it helps to prepare a substrate sample or specification, the functions that must be achieved and any test methods, the coating or resin system, heat-source and environmental limits, the target width and output range, and whether the line must be linked to flocking, laminating or slitting. For carpet, it helps to prepare the type and width of the grey, the finished form (tile size or roll width), the preferred backing, the heat source available, whether cutting and packing are to be linked, and the power supply and building depth. For setting, it helps to prepare fibre and construction, the present width and the target tolerance, the end use, whether extra-wide fabric is involved, and whether the material is already coated. For flocking, the substrate, the adhesive system, the type and length of the flock, the target hand, and whether sizing is done on the same line or in a second pass should be stated. If a published technology is to be discussed, the patent publication number or the model name may be noted in the enquiry. Confidential formulations can be agreed later, once a project is opened.
If a visit to the plant is not yet possible, process notes and photographs can first be sent by email, a call can be arranged, and a decision can then be taken on whether to inspect the site. The official site treats telephone and email as the main means of communication precisely so that a party still in the selection stage can begin to exchange process boundaries without first making a long journey. Once width, heat source and finished form are broadly clear, a visit to No. 3 Longtan Road to see the workshops and machines in build will be more to the point.
The parties with whom the company expects to communicate, in the wording of the official site, are mainly carpet mills, home-textile plants, and manufacturers that need functional coating, setting or the finishing of technical textiles. Whether the work is a new line in China, the rebuilding of an existing line, or an overseas plant that needs on-site installation, the official site presents customisation, installation and commissioning, and after-sales support as part of its public service. This article does not list unverified customer names, and it does not speak for any mill’s experience in use. Whether a cooperation is formed depends on whether the process matches and whether commercial terms are agreed, not on the force of publicity language.
This article does not forecast unpublished output targets, and it does not turn “welcome to cooperate” into a prior commitment on any order. The configuration, price, lead time and acceptance conditions of a custom machine can be fixed only in a factory quotation and a contract, after samples, process and site conditions are clear. For carpet mills, home-textile plants and other technical-textile companies that wish to make contact, what can be used now is the address, the telephone numbers, the email address, the website and the booth listed above.
The verification points may be repeated once, so that contact details are not copied incorrectly when the articles are reused: the full company name is 无锡前洲兴华机械有限公司, in English Wuxi Qianzhou Xinghua Machinery Co., Ltd.; the address is No. 3 Longtan Road, Qianzhou Supporting Area, Huishan Economic Development Zone, Wuxi; the telephone numbers are 0510-83397635 and 0510-83382635; the email address is info@xhmachinery.com; the website is https://www.xhmachinery.com/; and the forthcoming exhibition is ITMA ASIA + CITME in Shanghai, 20–24 November 2026, booth H8.1-D11. With those details saved, a concrete enquiry can begin, or a visit to the plant or the exhibition can be arranged. Seeing the equipment and comparing processes at the plant or at the show remains the most direct way to proceed.