本文另有中文版。
The registered address of Wuxi Qianzhou Xinghua Machinery Co., Ltd. is No. 3 Longtan Road, Qianzhou Supporting Area, Huishan Economic Development Zone, Wuxi. The official website uses the same address as the plant’s public contact address, in both Chinese and English. Headcount is written, in the wording approved for this profile, as more than 100 people; no unverified exact payroll figure is added. The site covers about 23,500 square metres of land and about 18,000 square metres of buildings. Those figures come from the official website and match the plant scale the company has long used in its public introduction.
Some pages have also used the wording “No. 3 Longtan Road, Qianzhou Industrial Park.” Both phrases point to the same site. The formal registered address is the one on the business license: No. 3 Longtan Road, Qianzhou Supporting Area, Huishan Economic Development Zone, Wuxi. The current official about page already follows the license wording. For a visit, the door number on Longtan Road is the practical reference.
The size of the site matters only if one also asks how the space is organised. The about page states that the plant has cold-working, sheet-metal, machining, final-assembly, electrical and warehouse workshops, and that the main processing equipment includes CNC machine tools and laser cutting machines. The homepage summarises manufacturing as four workshops and in-house production: the machining shop handles large machining work, with key rollers and frames made in-house; the fabrication shop handles welding and cold forming, with housings and oven structures built in-house; the sheet-metal shop carries out CNC sheet-metal work for housings and air ducts; and the assembly shop completes machine assembly and commissioning, with a full-line trial run before shipment. The about page also shows photographs of the plant panorama, the gate, laser cutting, final assembly, precision assembly and welding. That division of labour matches the manufacturing path of non-standard complete lines for coating, stentering and carpet backing: structural parts and rollers first, then housings and air ducts, and finally, on the assembly floor, the mechanical, electrical and thermal sections joined into a line that can be trial-run.
The official site also gives a capacity figure: annual output of about 15 machines or lines. For a factory whose work is largely custom-built complete equipment, that figure should be read as a published order of magnitude, not as the takt time of a standard model. There are about 29 published models, all of which can be customised to the customer’s process. The standard lead time is about three months, or about four months for special machines. Payment is a 30 per cent deposit, with the balance due before shipment; sea or land freight is supported. The warranty is one year. The company provides on-site installation and commissioning, including the dispatch of staff overseas, and lifetime after-sales support. Trial running is carried out at the customer’s factory after installation. Those terms are stated on the about page. They show that the plant’s work does not stop at in-house assembly; it also includes delivering the equipment and commissioning it at the place of use.
The location of the manufacturing base is given with a clear travel note. Visitors are welcome; the plant is about 40 minutes by car from Wuxi Shuofang Airport and Wuxi East high-speed railway station. Sales and technical contact is mainly by telephone and email, on weekdays from 08:00 to 17:00, at 0510-83397635 or 0510-83382635, or info@xhmachinery.com. The unified social credit code, 91320206755880341L, can be used together with the registered address to verify the company’s identity.
To call the site a “manufacturing base” is not an attempt to make the area sound larger than it is. It is a way of saying what kind of work the site can support. Coating machines, stenters and carpet finishing lines are usually not simple assemblies of standard parts. They are complete systems that may include a coating or sizing unit, infeed and outfeed frames, an oven or heated rollers, guidance, cutting or winding. To complete a full-line trial before shipment, a factory needs enough assembly space, lifting and energy supply, and it needs fabrication, sheet-metal, machining and electrical trades to work on the same site. The 23,500 square metres of land, the 18,000 square metres of buildings and the workshops listed above are the foundation of the capability shown on the official site.
For purchasing and technical visitors, the value of a plant visit is seldom the mere impression that “the building is large.” It lies in being able to see, against one’s own process, how coating or sizing units, infeed and outfeed frames, ovens or heated rollers, electrical cabinets and lines in assembly are organised together. The official site does not publish a floor-area breakdown for each workshop, nor the models and counts of machine tools and cutting machines, and this article does not invent those details. What can be stated is that cold-working, sheet-metal, machining, assembly, electrical work and warehousing are arranged on one site, that key structural parts are made in-house, and that complete machines are trial-run before shipment. How a particular type of line is laid out and test-run in the shop is a matter for a scheduled visit or an enquiry.
Registered capital is given on the official about page as RMB 5 million. For the manufacturing base itself, the more direct facts remain the address, the area, the workshop division, the main processing equipment and the published annual-output magnitude. The buildings are the container for production. Patents and certificates describe another layer of capability, and will be taken up in later articles on the basis of material already checked; they are not finished off in this plant profile.
This article does not turn the plant area into an industry ranking, and it does not stretch “key parts made in-house” into a claim that every component is produced on site. What the official website already states is that rollers, frames, housings, oven structures, outer panels and air ducts are processed in the plant, and that complete machines are assembled and trial-run in the assembly shop. Parameters, lead times and configurations remain subject to the factory quotation for each order. For visitors who wish to see the workshops and machines in build, No. 3 Longtan Road is a location that can be checked in person.